Order Bal Seal® Single Point Contact Lip PTFE Seals Now

Our Rotary-Service Housing-Mounted Seals Are Ready to Ship

Find Your Seal

If your application requires a housing-mounted seal with rotary service, our standardized single point contact lip PTFE seals are in stock.

Rely on our ready-to-ship line of seals when you don’t need customization, but still demand the power, performance, and globally recognized engineering of Bal Seal®.

Shop Now

Shop Standard Single Point Contact Lip PTFE Seals from Bal Seal®

Made in the U.S.A., our single point contact lip PTFE seals consist of a U-shaped seal jacket with a thin, low-profile dynamic lip geometry.

Essential specifications:

  • Concentrated sealing zone
  • Minimal friction
  • Spring-energized to protect against wear, temperature, and tolerance variation
  • Canted-coil, corrosion-resistant, 316 stainless steel spring
  • Effective sealing at startup and low pressures
  • Leak prevention and wear regulation

Built to enable bi-directional assembly, this radial seal excels in housing-mounted applications and rotary service.

Order Standard Seals

Trust Our Line of Standard Single Point Contact PTFE Lip Seals

Our spring-energized PTFE seals are prepared to meet your requirements with the assurance of Bal Seal®’s legacy of excellence.

Our in-stock PTFE rotary lip seals are available now to support your application’s critical functionalities, while protecting your application from debris, dirt, and environmental contaminants.

  • Performance and protection: Our PTFE seals are tested and proven to prolong equipment service life and improve uptime for your project’s demanding environment.
  • Industry-readiness: Our PTFE seals are prepared for use in aerospace, defense, and agriculture designs, and any other industries where excellent sealing solutions are required.
  • More than standard: These products are engineered to work better and remain sealed longer than other off-the-shelf solutions.

Shop Bal Seal® Single Point Contact PTFE Lip Seals Now

Choose from graphite-fiber-reinforced or polymer-filled PTFE seals and select your desired parameters to get these mechanical sealing solutions delivered right to you.

  • Product Name
    ▲ ▼
  • Constrained Inside Diameter (ØB)
    ▲ ▼
  • Seal Cross Section
    ▲ ▼
  • Constrained Outside Diameter (ØA)
    ▲ ▼
  • Maximum Surface Speed
    ▲ ▼
  • Max Pressure, Captivated
    ▲ ▼
  • Temperature Range
  • Price (Qty 5)
    ▲ ▼
  • Add To Order
    • E19730
    • 0.125 in.
    • 0.0625 in.
    • 0.25 in.
    • 250 fpm
    • 250 PSI
    • -50 to 350° F
    • $219.50
    • E19731
    • 0.25 in.
    • 0.0625 in.
    • 0.375 in.
    • 250 fpm
    • 250 PSI
    • -50 to 350° F
    • $224.70
    • E19732
    • 0.375 in.
    • 0.0625 in.
    • 0.5 in.
    • 250 fpm
    • 250 PSI
    • -50 to 350° F
    • $224.90
    • E19733
    • 0.5 in.
    • 0.0625 in.
    • 0.625 in.
    • 250 fpm
    • 250 PSI
    • -50 to 350° F
    • $230.00
    • E19734
    • 0.625 in.
    • 0.0625 in.
    • 0.75 in.
    • 250 fpm
    • 250 PSI
    • -50 to 350° F
    • $235.10
    • E19735
    • 0.75 in.
    • 0.0625 in.
    • 0.875 in.
    • 250 fpm
    • 250 PSI
    • -50 to 350° F
    • $245.50
    • E19736
    • 0.875 in.
    • 0.0625 in.
    • 1 in.
    • 250 fpm
    • 250 PSI
    • -50 to 350° F
    • $250.70
    • E19737
    • 1 in.
    • 0.0625 in.
    • 1.125 in.
    • 250 fpm
    • 250 PSI
    • -50 to 350° F
    • $255.90
    • E19738
    • 0.125 in.
    • 0.09375 in.
    • 0.3125 in.
    • 250 fpm
    • 250 PSI
    • -50 to 350° F
    • $219.50
    • E19739
    • 0.25 in.
    • 0.09375 in.
    • 0.4375 in.
    • 250 fpm
    • 250 PSI
    • -50 to 350° F
    • $224.70
    • E19740
    • 0.375 in.
    • 0.09375 in.
    • 0.5625 in.
    • 250 fpm
    • 250 PSI
    • -50 to 350° F
    • $249.90
    • E19741
    • 0.5 in.
    • 0.09375 in.
    • 0.6875 in.
    • 250 fpm
    • 250 PSI
    • -50 to 350° F
    • $230.00
    • E19742
    • 0.625 in.
    • 0.09375 in.
    • 0.8125 in.
    • 250 fpm
    • 250 PSI
    • -50 to 350° F
    • $235.10
    • E19743
    • 0.75 in.
    • 0.09375 in.
    • 0.9375 in.
    • 250 fpm
    • 250 PSI
    • -50 to 350° F
    • $270.50
    • E19744
    • 0.875 in.
    • 0.09375 in.
    • 1.0625 in.
    • 250 fpm
    • 250 PSI
    • -50 to 350° F
    • $250.70
    • E19745
    • 1 in.
    • 0.09375 in.
    • 1.1875 in.
    • 250 fpm
    • 250 PSI
    • -50 to 350° F
    • $255.90
  • Product Name
    ▲ ▼
  • Constrained Inside Diameter (ØB)
    ▲ ▼
  • Seal Cross Section
    ▲ ▼
  • Constrained Outside Diameter (ØA)
    ▲ ▼
  • Maximum Surface Speed
    ▲ ▼
  • Max Pressure, Captivated
    ▲ ▼
  • Temperature Range
  • Price (Qty 5)
    ▲ ▼
  • Add To Order
    • E19714
    • 0.125 in.
    • 0.0625 in.
    • 0.25 in.
    • 250 fpm
    • 250 PSI
    • -50 to 250° F
    • $189.70
    • E19715
    • 0.25 in.
    • 0.0625 in.
    • 0.375 in.
    • 250 fpm
    • 250 PSI
    • -50 to 250° F
    • $194.80
    • E19716
    • 0.375 in.
    • 0.0625 in.
    • 0.5 in.
    • 250 fpm
    • 250 PSI
    • -50 to 250° F
    • $195.00
    • E19717
    • 0.5 in.
    • 0.0625 in.
    • 0.625 in.
    • 250 fpm
    • 250 PSI
    • -50 to 250° F
    • $200.00
    • E19718
    • 0.625 in.
    • 0.0625 in.
    • 0.75 in.
    • 250 fpm
    • 250 PSI
    • -50 to 250° F
    • $205.00
    • E19719
    • 0.75 in.
    • 0.0625 in.
    • 0.875 in.
    • 250 fpm
    • 250 PSI
    • -50 to 250° F
    • $215.20
    • E19720
    • 0.875 in.
    • 0.0625 in.
    • 1 in.
    • 250 fpm
    • 250 PSI
    • -50 to 250° F
    • $220.30
    • E19721
    • 1 in.
    • 0.0625 in.
    • 1.125 in.
    • 250 fpm
    • 250 PSI
    • -50 to 250° F
    • $225.40
    • E19722
    • 0.125 in.
    • 0.09375 in.
    • 0.3125 in.
    • 250 fpm
    • 250 PSI
    • -50 to 250° F
    • $189.70
    • E19723
    • 0.25 in.
    • 0.09375 in.
    • 0.4375 in.
    • 250 fpm
    • 250 PSI
    • -50 to 250° F
    • $194.80
    • E19724
    • 0.375 in.
    • 0.09375 in.
    • 0.5625 in.
    • 250 fpm
    • 250 PSI
    • -50 to 250° F
    • $195.00
    • E19725
    • 0.5 in.
    • 0.09375 in.
    • 0.6875 in.
    • 250 fpm
    • 250 PSI
    • -50 to 250° F
    • $200.00
    • E19726
    • 0.625 in.
    • 0.09375 in.
    • 0.8125 in.
    • 250 fpm
    • 250 PSI
    • -50 to 250° F
    • $205.00
    • E19727
    • 0.75 in.
    • 0.09375 in.
    • 0.9375 in.
    • 250 fpm
    • 250 PSI
    • -50 to 250° F
    • $215.20
    • E19728
    • 0.875 in.
    • 0.09375 in.
    • 1.0625 in.
    • 250 fpm
    • 250 PSI
    • -50 to 250° F
    • $220.30
    • E19729
    • 1 in.
    • 0.09375 in.
    • 1.1875 in.
    • 250 fpm
    • 250 PSI
    • -50 to 250° F
    • $225.40

The Advantages of Our Standard Sealing Solutions

Customized seals aren’t always required to ensure your next project’s success. Experience the benefits of mechanical seals.

  • Cost-effectiveness: Affordable solutions for many applications
  • Reliability: Trusted products from the global leader Bal Seal® Engineering
  • Exceptional quality: Uncompromising value in every product we build
  • Fast delivery: Unmatched shipping speeds

Our signature line of ready-to-ship products is Made in the U.S.A. by Bal Seal® engineers, ITAR-compliant, eligible for Bal Seal® technical support, and includes comprehensive illustrations and datasheets.

Explore the Entire Line of Bal Seal® Ready-to-Ship PTFE Seals

Choosing standard over customization isn’t about a difference in quality; it’s about knowing how to tap agility and efficiency when it’s most important.

Get engineering precision with a fast turnaround by ordering our in-stock Bal Seal® seals today. Along with our single point contact lip seals, you can order these additional sealing solutions:

Featured Products

Black Graphite

1 in. ID Symmetrical Lip Seal with Graphite Fiber-Reinforced PTFE Jacket

0.5 in. ID Short Lip Seal with Graphite Fiber-Reinforced PTFE Jacket

readytek-v01-570x450-3d-seal-green-13x-e19685-1

0.125 in. ID Short Lip Seal with Polymer-Filled PTFE Jacket

0.75 in. ID Single Point Contact Lip Seal with Graphite Fiber-Reinforced PTFE Jacket

0.5 in. ID Single Point Contact Lip Seal with Polymer-Filled PTFE Jacket

Black Graphite

1 in. ID Symmetrical Lip Seal with Graphite Fiber-Reinforced PTFE Jacket

Custom Sealing for Next-Level Performance

We created ReadyTek OTS to give you fast access to our popular, proven sealing products. But we also offer engineering assistance and customized Bal Seal® solutions that will elevate your designs. To learn more, connect with us today.

Contact our Engineers
Contact our Engineers

Looking for more?

Get fast help with volume pricing, shipping outside the US, even custom designs.
Contact us at readytek@balseal.com or fill out the form below.